HBB-32HPW Introduction Image for PCHBB-32HPW Introduction Image for SP


  • stand-alone bender with unique built-in hydraulic pump for modifying rebar bending angle for D32 high tensile rebar at construction site.
  • Capable of both "push bending" and "pull bending" with free rotating bending hook.
  • The powerful motor is double insulated and can easily handle the hardest of tasks.


■Clearance A for Push Bending
  • push bending
■Clearance A for Pull Bending
  • pull bending
Required Clearance A for Push / Pull Bending
45 degrees90 degrees
over 180 mm / over 7.09 inover 385 mm / over 15.16 in
■Bending Angle
  • bending angle
Dia. of RebarMax. Capable Push / Pull Bending AngleMin. Required Push / Pull Bending Modification Angle
with rollerwithout rollerstandard bending hook
D13 / #482° - 125°
D16 / #578°130°
D19 / #669°135°
D22 / #765°137°
D25 / #865°90°138°
D29 / #9 - 85°145°
D32 / #10 - 80°147°


MotorSingle-Phase, 110-115V/220-230V, 50/60Hz, 1330W, Double Insulation
Weight25.4 kg / 56.0 lbs
(L x W x H)
670 mm x 302 mm x 219 mm
26.38 in x 11.89 in x 8.62 in
Max. Bending CapacityMax. D32 / #10 (620N/mm2 (63kgf/mm2)) = Grade60 / SD490
Bending Speed90 degrees bend for D32 (#10) rebar
push bend: approx. 16s
pull bend: approx. 15s
Standard AccessoriesWooden Box, Hydraulic Oil, Hex Wrenches, Spanners, Roller
Min. Required Height from the Ground when 90 deg Bendpush bend: approx. 495 mm
pull bend: approx. 185 mm
OptionBending Hook C for Modification Bending
Bending Hook C for Modification Bending