![N9205WMX Introduction Image for PC](../../../images/en/n9205wmxintro.png)
![N9205WMX Introduction Image for SP](../../../images/en/n9205wmxintro-sp.png)
FEATURESN9205WMX
- - Punching up to the maximum throat depth of 50mm possible without the need to change or remove the slide stopper.
- - Very fast punching speed for cordless puncher 3.5 seconds for thickness 9mm※1.
- - 4th generation stripper for easy confirmation of the hole position from both the left and right sides.
- - 360°rotating motor makes this puncher ideal for use in narrow spaces.
- - 40V max battery has water and dust-resistant triple layer structure and an enhanced terminal structure are engineered to protect against water and dust for any job site condition.※2
- - According to optimal power supply + optimal charging = “smart system” significantly increases battery life (compared to conventional models).
- - On site portability for maximum freedom of movement with Li-ion battery motor.
- - Hole puncher is specifically designed to provide high quality holes quickly and efficiently.
- ※1 Based on our test value. The test value except for returning speed. Punching speed varies depending on cutting conditions.
- ※2 This tool is designed to be less susceptible to dirt and moisture, but we do not guarantee that it will not break down due to dirt and moisture.
- "N" series is▲▲▲▲
- The new "N" series punchers are double acting with a new designed punch holder for longer life. The "N" series punch has also been redesigned so that only one punch is required to punch the range of materials: mild steel, stainless steel, angle iron and channel steel. The center of the punch has been made wider for easier positioning.
- - Both punching and retracting are completed by hydraulic power. This solves the "punch jammed" problem and allows uninterrupted and faster work.
- - Following a review by our customers, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
- - Only one die for flat bar, angle steel and channel flange is required. It is not necessary to change the die when punching different materials or thicknesses.
- ※Thinner material (t2-3.2mm) may have some burrs or deformation.
- - New punch design makes it easier to confirm the hole position.
SPECIFICATIONSN9205WMX
Motor | 18V DC |
Weight | 11.7 kg / 25.8 lbs (with 2.5Ah battery) |
Dimensions | 393 (L) x 129 (W) x 325 (H) mm 15.47 x 5.08 x 12.8 in |
Max. Throat Depth | 50 mm / 1.97 in |
Hole Shape | Round / Oblong |
Max. Hole Size | Mild steel (65,000 psi): Φ20/t9 mm |
Stainless steel (89,000 psi): Φ20/t6 mm | |
Standard Accessories | punch Φ14 mm, die SB14, tommy bar, spanner (8 × 10 mm), hex wrenches, carrying case, grip |
Option | work stand |
OTHER INFORMATIONN9205WMX
- ■Materials Dimensions [unit: mm]
Flat Bar
Max. 100 x t9
(center punching)Angle Steel
Min. 40 x 40
Max. 75 x 75 x t9
Max. 80 x 80Channel Flange
Min. 75 x 40 x t7
Max. 125 x 65 x t8H-steel
Min. 100 x 100 x t8
Max. 300 x 150 x t9- ■Punching Throat [unit: mm]
A: 10 mm
B: 50 mm
C: 15 mm
D: 68 mm
E: 71 mm
F: 42 mm
Punch & Die TABLEN9205WMX
■Round Punch & Die [unit: mm]
■Oblong Punch & Die [unit: mm]
■Vertical Oblong Punch & Die [unit: mm]
Round Punch | Round Die | Mild Steel | Channel Flange | Stainless Steel |
---|---|---|---|---|
6 | SB6 | t2 - t4 | - | t3 - t4 |
6.5 | SB6.5 | t2 - t6 | - | t3 - t4 |
8 | SB8 | t2 - t6 | - | t3 - t4 |
8.5 | SB8.5 | t2 - t6 | - | t3 - t4 |
10 | SB10 | t2 - t6 | t8 | t3 - t4 |
11 | SB11 | t2 - t9 | t8 | t3 - t6 |
12 | SB12 | t2 - t9 | t8 | t3 - t6 |
13 | SB13 | t2 - t9 | t8 | t3 - t6 |
14 | SB14 | t2 - t9 | t8 | t3 - t6 |
15 | SB15 | t2 - t9 | t8 | t3 - t6 |
16 | SB16 | t2 - t9 | t8 | t3 - t6 |
18 | SB18 | t2 - t9 | t8 | t3 - t6 |
19 | SB19 | t2 - t9 | t8 | t3 - t6 |
20 | SB20 | t2 - t9 | t8 | t3 - t6 |
Oblong Punch | Oblong Die | Mild Steel | Channel Flange | Stainless Steel |
---|---|---|---|---|
6.5×10 | 6.5×10B | t2 - t6 | - | t3 - t4 |
6.5×13 | 6.5×13B | t2 - t6 | - | t3 - t4 |
8.5×13 | 8.5×13B | t2 - t6 | - | t3 - t4 |
8.5×17 | 8.5×17B | t2 - t6 | - | t3 - t4 |
9×13.5 | 9×13.5B | t2 - t6 | - | t3 - t4 |
9×18 | 9×18B | t2 - t6 | - | t3 - t4 |
10×15 | 10×15B | t2 - t8 | t8 | t3 - t6 |
10×20 | 10×20B | t2 - t8 | t8 | t3 - t6 |
11×16.5 | 11×16.5B | t2 - t9 | t8 | t3 - t6 |
12×18 | 12×18B | t2 - t9 | t8 | t3 - t6 |
13×19.5 | 13×19.5B | t2 - t9 | t8 | t3 - t6 |
14×21 | 14×21B | t2 - t9 | t8 | t3 - t6 |
15×21 | 15×21B | t2 - t9 | t8 | t3 - t6 |
Vertical Oblong Punch | Vertical Oblong Die | Mild Steel | Channel Flange | Stainless Steel |
---|---|---|---|---|
TN12×20 | TN12×20B | t2 - t9 | t8 | t3 - t6 |
TN14×20 | TN14×20B | t2 - t9 | t8 | t3 - t6 |