FEATURESMB-819
- Capable of close to 6D bending of D20 (#6) rebar by a standard roller and collar.
- Capable a 5D bend of D20 (#6) rebar by an optional roller and collar.
- Dial setting for basic angle 0 to 180 degrees with sliding lever for fine control.
- Optional "foot switch" for faster control.
- Optional "90 degrees bending collar" for small radius bending of D10 or D13 rebar.
SPECIFICATIONSMB-819
| Motor | Single-Phase, 110-115V/220-230V, 50/60Hz, 1050W |
| Weight | 54.5 kg / 120.2 lbs |
| Dimensions (L x W x H) | 455 mm x 372 mm x 393 mm / 17.91 in x 14.65 in x 15.47 in |
| Max. Bending Capacity | D20 / #6 (620N/mm2 (63kgf/mm2)) = SD490 / Grade60 |
| Bending Speed | 180 degrees bend for D20 (#6) rebar: 5s |
| Bending Radius with Standard Rollers and Collars | D8: R15 - R69, D20: R19.5 - R59 |
| Max. Number Bars can be Bent at One Time | D20: 1, D16: 2, D13: 3, D10: 4 |
| Bending Angle | 0 - 180 degrees |
| Standard Accessories | roller: No.B19(φ81), No.B16(φ100), No.B13(φ118), No.B10(φ138) collar:No.19(φ76), No.16(φ64), No.13(φ52), No.10(φ39) + - screwdriver, hex wrenches (2•17mm), spanner, waterproof cover, tool box |
| Options | foot switch, bender stand, 90 degrees bending collar (for D10 & D13), roller for 5D (up to 560N/mm²): No.516(φ84), No.519(φ61) collar for 5D (up to 560N/mm²): No.516(φ80), No.519(φ95) |
ROLLERS & COLLARS TABLEMB-819
■Minimum Required Length for Bending
■Combination of Rollers and Collars
■Combination of Standard Rollers & Collars
■Combination of Rollers & Collars for a 5D Bend
※ red is optional.
| Dia. of Rebar | Roller | Collar | Min. Length "A" | ||
|---|---|---|---|---|---|
| 90 deg bend | 135 deg bend | 180 deg bend | |||
| D10 | B10 (φ138) | B10 (φ39) | 66mm | 86mm | 106mm |
| D13 | B13 (Φ118) | B13 (Φ52) | 84mm | 110mm | 136mm |
| D16 | B16 (Φ100) | B16 (Φ64) | 99mm | 131mm | 163mm |
| D20 | B19 (Φ80) | B19 (Φ76) | 118mm | 156mm | 194mm |
| Dia. of Rebar | Collar | Min. Length "B" |
|---|---|---|
| D10 | B10 (φ39) | 132mm |
| D13 | B13 (Φ52) | 151mm |
| D16 | B16 (Φ64) | 169mm |
| Dia. of Rebar | Roller | Collar | Min. Length "A" | ||
|---|---|---|---|---|---|
| 90 deg bend | 135 deg bend | 180 deg bend | |||
| D16 | ※516 (Φ84) | ※516 (Φ80) | 120mm | 157mm | 195mm |
| D20 | ※519 (Φ61) | ※519 (Φ95) | 138mm | 183mm | 228mm |
OTHER INFOMB-819
■ 90 degrees bending collar (Optional)
■Example of using 90 degrees bending collar
■Example of using bender stand and foot switch
