FEATURES2213WMX
- - Punch hole 24/t9 mm stainless steel with cordless motor.
- - Punch hole 24/t12 mm mild steel in 6.8 seconds※1.
- - only one pair of punch and die is required for each hole size to punch flat bar (mild and stainless), angle steel, H-steel and channel flange※2
- - 40V max battery has water and dust-resistant triple layer structure and an enhanced terminal structure are engineered to protect against water and dust for any job site condition.※3
- - According to optimal power supply + optimal charging = “smart system” significantly increases battery life (compared to conventional models).
- - On site portability for maximum freedom of movement with Li-ion battery motor.
- - Hole puncher is specifically designed to provide high quality holes quickly and efficiently.
- - Both punching and retracting are completed by hydraulic power. This solves the "punch jammed" problem and allows uninterrupted and faster work.
- ※1 Based on our test value. The test value except for returning speed. Punching speed varies depending on cutting conditions.
- ※2 Punching thinner material may leave some burrs or deformation.
- ※3 This tool is designed to be less susceptible to dirt and moisture, but we do not guarantee that it will not break down due to dirt and moisture.
SPECIFICATIONS2213WMX
| Motor | D.C. 36V (40V max) |
| Weight | 24.0 kg / 55.1 lbs (with 2.5Ah battery) |
| Dimensions | 485 (L) x 227 (W) x 441 (H) mm 19.1 x 8.94 x 17.36 in |
| Max. Throat Depth | 50 mm / 1.97 in |
| Hole Shape | Round / Oblong |
| Max. Hole Size | Mild steel (65,000 psi): Φ22/t13 mm, φ24/t12 mm |
| Stainless steel (89,000 psi): Φ24/t9 mm | |
| Standard Accessories | punch Φ18 mm, die SB18, tommy bar, hex wrenches, carrying case, grip |
| Option | work stand |
OTHER INFORMATION2213WMX
- ■Materials Dimensions [unit: mm]
Flat Bar
Max. 100 x t13
(center punching)Angle Steel
Min. 60 × 60 × t4
Max. 100 × 100 × t13Channel Flange
Min. 125 × 65 × t8
Max. 300 × 90 × t13H-steel
Min. 125 × 125 × t9
Max. 450 × 200 × t13- ■Punching Throat [unit: mm]
A: 14.5 mm
B: 50 mm
C: 24 mm
D: 75 mm
E: 142 mm
F: 12 mm
G: 51 mm
Punch & Die TABLE2213WMX
■Round Punch & Die [unit: mm]
■Oblong Punch & Die [unit: mm]
| Round Punch | Round Die | Mild Steel | Channel Flange | Stainless Steel |
|---|---|---|---|---|
| 10 | SB10 | t2 - t9 | - | t3 - t6 |
| 11 | SB11 | t2 - t9 | t8 | t3 - t6 |
| 12 | SB12 | t2 - t10 | t8 | t3 - t6 |
| 13 | SB13 | t2 - t10 | t8 | t3 - t6 |
| 14 | SB14 | t2 - t13 | t13 | t3 - t9 |
| 15 | SB15 | t2 - t13 | t13 | t3 - t9 |
| 16 | SB16 | t2 - t13 | t13 | t3 - t9 |
| 18 | SB18 | t2 - t13 | t13 | t3 - t9 |
| 20 | SB20 | t2 - t13 | t13 | t3 - t9 |
| 22 | SB22 | t2 - t13 | t13 | t3 - t9 |
| 24 | SB24 | t2 - t12 | t8 | t3 - t9 |
| Oblong Punch | Oblong Die | Mild Steel | Channel Flange | Stainless Steel |
|---|---|---|---|---|
| 10×15 | 10×15B | t2 - t9 | t8 | t3 - t6 |
| 10×20 | 10×20B | t2 - t9 | t8 | t3 - t6 |
| 11×16.5 | 11×16.5B | t2 - t9 | t8 | t3 - t6 |
| 12×18 | 12×18B | t2 - t10 | t8 | t3 - t9 |
| 13×19.5 | 13×19.5B | t2 - t10 | t8 | t3 - t9 |
| 14×21 | 14×21B | t2 - t13 | t13 | t3 - t9 |
| 15×21 | 15×21B | t2 - t13 | t13 | t3 - t9 |
| 18×21 | 18×21B | t2 - t13 | t13 | t3 - t9 |