FEATURESN9205W
- - Punching up to the maximum throat depth of 50mm possible without the need to change or remove the slide stopper.
- - Very fast punching speed for cordless puncher 2.9 seconds※ for thickness 9mm.
- - 4th generation stripper for easy confirmation of the hole position from both the left and right sides.
- - Specifically designed to provide high quality holes quickly and efficiently.
- ※ Based on our test value. The test value except for returning speed. Punching speed varies depending on cutting conditions.
- "N" series is▲▲▲▲
- The new "N" series punchers are double acting with a new designed punch holder for longer life. The "N" series punch has also been redesigned so that only one punch is required to punch the range of materials: mild steel, stainless steel, angle iron and channel steel. The center of the punch has been made wider for easier positioning.
- - Both punching and retracting are completed by hydraulic power. This solves the "punch jammed" problem and allows uninterrupted and faster work.
- - Following a review by our customers, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
- - Only one pair of punch and die for flat bar, angle steel and channel flange is required. It is not necessary to change the die when punching different materials or thicknesses.
- ※Thinner material (t2-3.2mm) may have some burrs or deformation.
- - New punch design makes it easier to confirm the hole position.
SPECIFICATIONSN9205W
| Motor | Single-Phase, 110-120V/220-240V, 50/60Hz, 1050W, Double Insulation |
| Weight | 11.4 kg / 25.1 lbs |
| Dimensions | 524 (L) x 129 (W) x 325 (H) mm 20.6 x 5.08 x 12.8 in |
| Max. Throat Depth | 50 mm / 1.97 in |
| Hole Shape | Round / Oblong |
| Max. Hole Size | Mild steel (65,000 psi): Φ20/t9 mm |
| Stainless steel (89,000 psi): Φ20/t6 mm | |
| Standard Accessories | punch Φ14 mm, die SB14, tommy bar, spanner (8 × 10 mm), hex wrenches, carrying case, grip, work stand |
OTHER INFORMATIONN9205W
- ■Materials Dimensions [unit: mm]
Flat Bar
Max. 100 x t9
(center punching)Angle Steel
Min. 40 x 40
Max. 100 x 100 x t9Channel Flange
Min. 75 x 40 x t7
Max. 125 x 65 x t8H-steel
Min. 100 x 100 x t8
Max. 300 x 150 x t9- ■Punching Throat [unit: mm]
A: 10 mm
B: 50 mm
C: 15 mm
D: 68 mm
E: 71 mm
F: 42 mm
Punch & Die TABLEN9205W
■Round Punch & Die [unit: mm]
■Oblong Punch & Die [unit: mm]
■Vertical Oblong Punch & Die [unit: mm]
| Round Punch | Round Die | Mild Steel | Channel Flange | Stainless Steel |
|---|---|---|---|---|
| 6 | SB6 | t2 - t4 | - | t3 - t4 |
| 6.5 | SB6.5 | t2 - t6 | - | t3 - t4 |
| 8 | SB8 | t2 - t6 | - | t3 - t4 |
| 8.5 | SB8.5 | t2 - t6 | - | t3 - t4 |
| 10 | SB10 | t2 - t6 | t8 | t3 - t4 |
| 11 | SB11 | t2 - t9 | t8 | t3 - t6 |
| 12 | SB12 | t2 - t9 | t8 | t3 - t6 |
| 13 | SB13 | t2 - t9 | t8 | t3 - t6 |
| 14 | SB14 | t2 - t9 | t8 | t3 - t6 |
| 15 | SB15 | t2 - t9 | t8 | t3 - t6 |
| 16 | SB16 | t2 - t9 | t8 | t3 - t6 |
| 18 | SB18 | t2 - t9 | t8 | t3 - t6 |
| 19 | SB19 | t2 - t9 | t8 | t3 - t6 |
| 20 | SB20 | t2 - t9 | t8 | t3 - t6 |
| Oblong Punch | Oblong Die | Mild Steel | Channel Flange | Stainless Steel |
|---|---|---|---|---|
| 6.5×10 | 6.5×10B | t2 - t6 | - | t3 - t4 |
| 6.5×13 | 6.5×13B | t2 - t6 | - | t3 - t4 |
| 8.5×13 | 8.5×13B | t2 - t6 | - | t3 - t4 |
| 8.5×17 | 8.5×17B | t2 - t6 | - | t3 - t4 |
| 9×13.5 | 9×13.5B | t2 - t6 | - | t3 - t4 |
| 9×18 | 9×18B | t2 - t6 | - | t3 - t4 |
| 10×15 | 10×15B | t2 - t8 | t8 | t3 - t6 |
| 10×20 | 10×20B | t2 - t8 | t8 | t3 - t6 |
| 11×16.5 | 11×16.5B | t2 - t9 | t8 | t3 - t6 |
| 12×18 | 12×18B | t2 - t9 | t8 | t3 - t6 |
| 13×19.5 | 13×19.5B | t2 - t9 | t8 | t3 - t6 |
| 14×21 | 14×21B | t2 - t9 | t8 | t3 - t6 |
| 15×21 | 15×21B | t2 - t9 | t8 | t3 - t6 |
| Vertical Oblong Punch | Vertical Oblong Die | Mild Steel | Channel Flange | Stainless Steel |
|---|---|---|---|---|
| TN12×20 | TN12×20B | t2 - t9 | t8 | t3 - t6 |
| TN14×20 | TN14×20B | t2 - t9 | t8 | t3 - t6 |